This week we make some small odd shaped backing spacers that allow a solid through hull bolting of the stanchion bases where they hit the molded curves of the hull lines. We used Epoxy, Modeling clay, Blue Painters tape and some washers to make the correct shape.
We also get a lot of little things done. I added two weatherproof switches to go on the side of the helm station to light up the mizzen spreader lights and also the spare anchor light.
We also wired the compass light into the dash lights, but as I type this I can see why we may want to put that on a separate switch so that we can turn off the engine gauges when we are sailing. Dangit, I am annoyed with myself for just thinking of this.
We also installed the VHF antenna and the Standard Horizon GX2100 AIS, VHF receiver and transmitter.
Keywords: Stantchion Base, Stantchion, Stanchion, through-bolted, bedding hardware, epoxy plugs, epoxy backing plates, backing plate, curved mold, creating epoxy molds, making fiberglass molds, anchor light, how to wire an anchor light, how to install VHF, how to install AIS, AIS Antenna, AIS/VHF Splitter, VHF, Standard Horizon
Please share this video with others; we would love to continue to grow our community. 🙂
Tools and supplies we use regularly can be found here:
- Jet Band Saw
- Sanding Tape 120 Grit – 1 inch wide
- Sanding Tape for Spindles (220 Grit)
- Small Sanding Cord for Spindles (150 Grit)
- Screwdriver with nut ends
- Pry Bar Set
- Oscillating Multi-tool (about $35)
- The Best small wood cutting blades
- Great “plunge cutter”
- ABSOLUTE Best metal cutting blade (for cutting bolts, etc.)
- Safety Glasses
- xActo Blade Knife
- Ryobi Variable Speed Jigsaw
Video equipment used is: Canon Vixia G40
Thank you for watching and please share this with your friends or someone that you think would get something from these videos. (Education, humor, dismay, whatever.)
See how we go about living aboard and sailing with kids (Grandkids 4 and 12 years of age). We are in the middle of a huge sailboat refit. Our Boat is designed by Bill Garden and built in Taiwan. See how to become a liveaboard whether you stay in a marina or are a cruiser. #boatlife #saillife #SVDreamchaser
Subscribe !!  Click this link IF you are not already subscribed.
Support us!! on Patreon if you want to help show your love for the content
Lets Connect !!
Facebook – http://www.facebook.com/svdreamchaser
Twitter – http://www.twitter.com/svdreamchaser
Tumbler – http://svdreamchaser.tumbler.com
Check out some of the other videos we have here.
[embedyt] https://www.youtube.com/embed?listType=playlist&list=PLlwpbgibX_O8epNFq9OYynNK_SHzYIOGW&v=gzzteJxewAU&layout=gallery[/embedyt]